Water purification with materials PANION®

Textile forms

Fibrous ion exchangers PANION® are produced in different textile forms, which can be used in water purification plants of different construction and operating principle.

The best choice

The qualitative and quantitative composition of water, the target components to be removed, and the requirements for purification efficiency are individual and depend on the region, the type of water being purified and other factors. The wide range of materials PANION® allows you to choose a solution for almost any water purification task.

Materials PANION® for water purification

Panion 110 — Removal of ions of heavy metals, water softening

Fibrous ion exchanger PANION 110

PANION 110 — weak-acid fibrous cation exchanger, an analogue of well-known trademarks VION, FIBAN, MION.

Applications:

• Air purification from volatile substances of base nature: ammonia, amines, alkalis etc. Panion 110 can be applied in industrial and domestic air cleaning systems;
• Water purification from the ions of heavy metals, water softening;
• Human protective means (respirators, gas-masks, protective costumes etc): removal of vapors of ammonia and amines.

Technical specification*:

Functional groups:	-COOH
The base polymer	polyacrylonitrile (PAN) fiber
Ion exchange capacity, meq/g	4 – 7
Temperature working range	0 – 80°C
pH working range	1 – 12
Textile forms	Staple fiber: cut length 30-70 mm. Non-woven needle-punched fabric: surface density from 200 to 1000 g/m2; width of the fabric up to 1600 mm, thickness from 2 to 10 mm. On special request the others textile forms can be produced: threads, cloths, bands, short staple fiber etc..
Stability against aggressive media	Stable against concentrated HCl, H2SO4, Na2CO3 and all organic solvents. In concentrated NaOH accumulates carboxyl acid groups
Regeneration	With a weak solution of acid or salt
Stable in multiple cycles of «sorption-regeneration», «wetting-drying»

* - on a customer request fibrous ion exchange material with other physical and chemical properties can be produced.

PANION 110 staple and non-woven fibers

30X

Panion 120 — Removal of ions of heavy metals: Fe(II), Pb(II), Zn(II), Cu(II), Co(II), Ni(II), Cd(II), Hg(II) etc.

Fibrous ion exchanger PANION 120

PANION 120 — weak acid fibrous ion exchanger.

Applications

• Selective water purification from the ions of heavy metals: Fe(II), Pb(II), Zn(II), Cu(II), Co(II), Ni(II), Cd(II), Hg(II);

Technical specification*

Functional groups	mono- and diacetate
The base polymer	polyacrylonitrile (PAN) fiber
Ion exchange capacity, meq/g	2 – 6
Temperature working range	0 – 80°C
pH working range	1 – 12
Textile forms	Staple fiber: cut length 30-70 mm. Non-woven needle-punched fabric: surface density from 200 to 1000 g/m2; width of the fabric up to 1600 mm, thickness from 2 to 10 mm. On special request the others textile forms can be produced: threads, cloths, bands, short staple fiber etc..
Stability against aggressive media	Stable against concentrated solutions of acids, soda and all organic solvents
Regeneration	With a weak solution of acid
Stable in multiple cycles of «sorption-regeneration», «wetting-drying»

* - on a customer request fibrous ion exchange material with other physical and chemical properties can be produced.

PANION 120 staple and non-woven fibers

30X

Panion 130 — Selective removal of ions of silver from water and process liquids

Fibrous ion exchanger PANION 130

PANION 130 — fibrous ion exchange filtering material for selective removal ions of heavy metals and Ag from drinking water.

Applications

• Water purification from ions Ag and heavy metals (Pb(II), Zn(II), Cu(II), Co(II), Ni(II), Cd(II));

Technical specification*

Functional groups	amine, carboxylic, sulfhydryl
The base polymer	polyacrylonitrile (PAN) fiber
Temperature working range	0 – 60°C
pH working range	1 – 12
Textile forms	Staple fiber: cut length 30-70 mm. Non-woven needle-punched fabric: surface density from 200 to 1000 g/m2; width of the fabric up to 1600 mm, thickness from 2 to 10 mm. On special request the others textile forms can be produced: threads, cloths, bands, short staple fiber etc..
Stability against aggressive media	Stable against concentrated solutions of acids, soda and all organic solvents
Regeneration	Not regenerating
Sorption capacity on Ag ions (mass of ion-exchanger in the layer = 1 gram)

* - on a customer request fibrous ion exchange material with other physical and chemical properties can be produced.

PANION 130 staple and non-woven fibers

30X

Panion 140 — Selective removal of ions of trivalent and quintavalent arsenic (As (III), As (V))

Fibrous ion exchanger PANION 140

PANION 140 — fibrous ion exchange filtering material for selective removal ions of Arsenic (III), Arsenic (IV) and heavy metals from drinking water.

Applications

• Water purification from ions of Arsenic (III), Arsenic (IV), heavy metals;

Technical specification*

Functional groups	Nanoparticles of FeOOH, which are involved in polymer fibrous matrix
The base polymer	Anion exchanger with tertiary amino groups on base of polyacrylonitrile (PAN) fiber
Content of FeOOH, mmol/g	0,9 - 1,3
Temperature working range	0 – 60°C
pH working range	5 – 10
Textile forms	Staple fiber: cut length 30-70 mm. Non-woven needle-punched fabric: surface density from 200 to 1000 g/m2; width of the fabric up to 1600 mm, thickness from 2 to 10 mm. On special request the others textile forms can be produced: threads, cloths, bands, short staple fiber etc..
Stability against aggressive media	Stable against concentrated acid solutions, Na2CO3 and all organic solvents. Sorption capacity is reduced in high concentrated acid solutions
Regeneration	Not regenerating
Adsorption activity on ion As (BV - quantity of sorption layer volumes purified, initial concentration – 100 microgram/m3)

* - on a customer request fibrous ion exchange material with other physical and chemical properties can be produced.

Panion 320 — Removal of nitrates, anions of metals (anions of chromium, molyb-denum, tungsten, vanadium).

Fibrous ion exchanger PANION 320

PANION 320 – strong base fibrous anion exchanger

Applications

• Air purification from volatile substances of acid nature (SO₂, SO₃, HF, HCl, H₂SO₄, N_xO_y, CrO₃ etc) in industrial and domestic air cleaning systems. PANION 320 is effective in wide range of air humidity (30-100%);
• Water purification from the nitrates, anions of metals (chrome, molybdenum, wolfram, vanadium);
• Human protective means (respirators, gas-masks, protective costumes etc): removal of gases and vapors of acid nature SO₂, SO₃, HF, HCl, HCOOH, CrO₃.

Technical specification*

Functional groups
The base polymer	polyacrylonitrile (PAN) fiber
Ion exchange capacity, meq/g	1,5 – 2,5 (on strong base groups) 0,8 – 1,5 (on weak base groups)
Temperature working range	0 – 50°C
pH working range	1 – 12
Textile forms	Staple fiber: cut length 30-70 mm. Non-woven needle-punched fabric: surface density from 200 to 1000 g/m2; width of the fabric up to 1600 mm, thickness from 2 to 10 mm. On special request the others textile forms can be produced: threads, cloths, bands, short staple fiber etc.
Stability against aggressive media	Stable against diluted solutions of acids and alkalis
Regeneration	With a weak solution of soda Na2CO3
Stable in multiple cycles of «sorption-regeneration», «wetting-drying»

* - on a customer request fibrous ion exchange material with other physical and chemical properties can be produced.

PANION 320 non-woven fiber

30X

Our company is ready to answer your questions and offer a solution for water purification in accordance with your conditions and requirements.